- The 24cm polyurethane beach wheel has a maximum payload of 40kg (88lbs).
- Available in 12.7mm or 20mm bushing and weighs only 0.7kg.
- Outside dimensions: 24cm x 12.3cm.
- Ideal for making kayak carts or similar.
Low Pressure Polyurethane Beach Wheels for more heavy duty, ambitious use
Wheeleez® wheels are equipped with unique, pliable, pneumatic tires that will roll, even glide, over soft sand, turf and other challenging terrain. The tire’s low pressure permits rolling heavy loads over unstable/uneven ground with ease. These balloon wheels will not sink or plow into soft ground. They are great for use on delicate surfaces preventing indentations, as well as providing shock-absorbing qualities.
Read a review of the 24cm wheels on Hobie Forums.
Here’s an excerpt from the review, “Load capacity is up to 88 lb. per wheel. I’m not recommending the following procedure, but the local dealer’s demo boat was loaded with concrete here for a combined weight of 190 lb. sitting on the wheels shown here. This was rolled this over the wood hurdles to see if the wheels would pinch the rims. Not even close.”
This product is not designed and should not be (i) used for horizontal movement along an incline where one side of the product is elevated above the other, (ii) moved at speeds in excess of normal walking speed (2-4 miles per hour), (iii) subjected to sharp turning maneuvers. Exceeding tire pressure and/or maximum payload limitations voids any Warranty. This product is not intended to be used for long-term storage under loaded conditions. This product is NOT legal for “ON-ROAD” use and is NOT intended to be used as a FLOTATION DEVICE, FLYING INSTRUMENT, or TOY.
If you need to replace “Roleez ” wheels, you will find that Wheeleez low-pressure balloon wheels will work perfectly. Just make sure the bearing or bushing size matches.
|Bushing or Bearing Size||
12.7 mm bushing "A", 12.7 mm bushing with Twist Lock Knob "A-TLK", 20 mm bushing "B"